News

home /News /

Model ZYKM - II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine Being Loaded For Shipment to Huanyu Paper Products Co., Ltd Rizhao Shangdong Province

Model ZYKM - II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine Being Loaded For Shipment to Huanyu Paper Products Co., Ltd Rizhao Shangdong Province

2016-01-15

On Jan. 15, 2016, our company sent model ZYKM- II 1200 x2200mm high-speed automatic four-color printing slotting die-cutting machine to a customer in Shandong. This machine is completed and ready for shipment. The machine has the following characteristics: the machine size is 1200 x2200mm. Since the machine put into operation, the customer is very satisfied for it shows high printing accuracy, stable running and nice performance

See the detail information at http://www.chinesepacking .com/display.asp?id=925.

In order to meet the growing production needs, Huanyu Paper Products Co., Ltd signed another contract with our company to purchase ZYKM II high-speed automatic four-color printing slot die cutting machine in Nov. 2015. Our company finished production in Jan. 2016.The size of the equipment is 1200x2200mm, which is composed of feeder (roller type leading edge paper feeding), four-color printing units, slotter and die cutter. The highest mechanical speed is 200 pieces per minute, after the customer check careful and acceptance the equipment, he thinks that it features accurate printing and registration, less slotting die cutting error and high automation. He feels very satisfied since it meets the technical requirements of the contract.




Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine



Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine



Feeder of Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine

1. High feeding accuracy – It is also meet the conveying requirements even it conveys the sheets of 5mm-2.0mm;

2. Mechanical vibration is basically eliminated. Due to the characteristics of servo drive, the vibration caused by various mechanical cam transmission is avoided. Therefore it fully meets the requirements that non gaps produced or non errors occur from the clearances in the process of the feeding rolls;

3. The surface of the wheel is covered with polyurethane wear-resistant material for easy replacement..



Feeder of Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine



Feeder of Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine



Feeder of Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine




Printer of Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine

1. Equipped with metal anilox roller, mesh number: 220 LPI;

2. Printed phase is set with planetary gearing differential adjustment;

3. Printing phase adjustment is set in electric control and digital display at 360o (available for both operation and stop);

4. The printing plate roll axial shifting is manually adjusted, and the adjustment amount is ±10mm to facilitate plate alignment;

5. Pneumatic membrane pump functions in stable ink supply and easy operation and maintenance.



Printer of Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine



Slotter of Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine

1. The slot phase adjustment

(1) Slotting phase adjustment uses original digital control gauge made by South Korean, which is able to achieve from the current value to target one with digital control and display to make adjustment more conveniently and quickly;

2) Slotting box height is done with five knives working in synchronization and electrical adjustment, the slotting boss is equipped with collision protector to ensure the movement will not damage the machine.


2. Slotting shaft adjustment

(1) Upper/bottom slotted knife shaft uses synchronous electric adjustment, connected with a transmission shaft, when it moves it keeps the up/down knives aligned so as to prolong tool life;

(2) Slotted knife boss gap adopts self-locker;

(3) It is 7 mm slotted knife width and serrated blade, the blade adopts alloy steel material, ground after heat treatment, featuring hardness and toughness. Trimming knife made of alloy steel is ground after heat treatment, knife edge features sharp blade and high precision;

(4) The elastic angle cutter structure can cut off blanks of single or double wall corrugated board for convenient operation without adjusting.

3. Creasing wheel

(1) The transverse positions of pre-creasing, creasing wheels and slotter boss are electrically adjusted;

(2) The pre-creasing, creasing gap adjustment uses self-locker;

(3) Upper creasing wheel are wrapped with PU material not to damage the blanks.



Slotter of Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine



Die-cutter of Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine


1. Die-cutter Cylinder (bottom)

(1) The die-cutter cylinder is made of high qualified steel precisely through static balance calibration and strict dynamic balance calibration test to enhance the smooth operation and high precise die-cutting;

(2) Die-cutting mould fastening screw holes spacing: axial 50 mm, radial 20 in equal division;

(3) Die-cutter cylinder phase is set in dual speed electric digital adjustment with planetary gear at 360 degrees (all adjustment can be done in motion or stop);

(4) The die-cutter cylinder’s left/right transverse shifting uses self-locker with the adjusting range ±10 mm;

(5) Phase adjustment is done electrically and digitally with planetary gear at 360 degrees adjustment (all adjustment can be done in motion and stop).

2. Anvil cylinder (upper)

(1) It is made of high quality steel, precisely manufactured through static balance test, then dynamic balancing test strictly;

(2) Anvil cylinder is equipped with differential speed compensation unit to control its speed, and the compensation range is of +/- 3mm;

(3) Rubber gasket adopts cutter/trimmer to keep covering flat to creases the service life and reduce costs.



Workers of AOTE are busy in loading Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine on truck



Workers of AOTE are busy in loading Model ZYKM-II 1200x2200mm High-Speed Automatic Four-Color Printing Slotting Die-Cutting Machine on truck, which will be delivered to the customer in Shandong Province


Get Free Inquiry Now
We will contact you as soon as possible!
 
leave a message Get Free Inquiry Now
We will contact you as soon as possible!