News

home /News /

Model ZYKM IV High Speed Auto Flexo Printing (5 Color) Varnishing Drying Production Line Purchased By Romania "S.C. ANSOR PROD S.R.L" Company Was Completed On Feb. 12, 2015 And Would Be Delivered.Russia

Model ZYKM IV High Speed Auto Flexo Printing (5 Color) Varnishing Drying Production Line Purchased By Romania "S.C. ANSOR PROD S.R.L" Company Was Completed On Feb. 12, 2015 And Would Be Delivered.Russia

2015-02-17

Feb. 12, 2015, the model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line purchased by Romania Company "S.C. ANSOR PROD S.R.L" was completed. This machine (1200X2400) consist of fully automatic feeding unit (original Sun-feeder from US), 5-color printing unit, drying unit and varnishing unit. The max speed is 200sheets/min featuring high speed, high automation, high resolution, high efficiency and full computer control, full vacuum transmission, all ceramic anilox cylinders (700 meshes), all enclosed doctor blade systems, distinct printing with ±0.3mm registration. This line consists of 8 units, totaling 50 tons loaded into 2x40-feet containers and 1 frame container, which is an ideal equipment for making corrugated boxes for high end food, beverage, household electrical appliances and toys etc.


-


Picture: Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line is being delivered to Romania.




Picture: The feeder of Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line adopts advanced PLC and touch screen technique for easy order change, is stable and reliable to fulfill the output setup, production indication, plate-wiping memory, skip feeding and order storage. The auto wheeled feeder (original Sun-feeder from US) guarantees the stable and accurate blank feeding with the high speed up to 200 sheets/min.



Picture: The printer of Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line.

The touch screen is able to set the printing cylinder at 360 degree forward/ backward (frequency inverter/dual speed) with human-machine interface auto positioning.

The touch screen controls printer cylinder axial regulation at max ±10mm shifting amount with human-machine interface auto positioning.

The vacuum suction chamber adopts inverter control to set the airflow to guarantee the accuracy of conveyance and registration, and realizes pressure-free blank conveyance to minimize sheet damage;

By employing 700 mesh ceramic anilox cylinder with Auclean enclosed doctor blade system;

US ARO dual way membrane pump to control the ink amount in line with the main motor rotation; the chamber equipped with US ink supply system with selective directional valve for easy cleaning and saving water.



Picture: The printer of Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line



Picture: The dryer unit of Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line equipped with IR dyer system.

1. IR heater system of quick and stable temperature rise, 45W for every unit;

2. Constant temperature control and sectional heating to save power;

3. Temperature alarm, auto warning for abnormal heating for safety and reliability;

4. Strong airflow cycle for even and quick drying;

5. Drying chamber air is settable for easy installation, lamp tube change and desired heating.



The picture shows that Romanian customer comes to our company to check and accept the printing effect of ZYKM IV high-speed automatic five-color printing varnishing and drying production line



Picture: After inspected by Romanian customer, the equipment was ready to be delivered to Shanghai Port, in Feb. 12, 2015. It is the well packed Model ZYKM IV machine attached with components



Picture: The feeder and its components of Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line is well packed.



Picture: The feeder of Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line was being packed.




Picture: The printer of Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line was being packed.



Picture: The well packed Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line was being delivered to Shanghai Port, which was delivered by two trucks. It is being loaded.



The first truck load is completed and being tied.



The loaded first truck is being covered and then delivered to Shanghai Port.



Picture: The other packed units of Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line were being loaded on the 2nd truck.



Picture: The other packed units of Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line were being loaded onto the 2nd truck.



The machine loading completed in the 2nd truck is being tied, fastened and covered and then will be delivered to Shanghai Port safely.



Two trucks loaded with the said machines arrived at the warehouse of Shanghai Port on Feb. 13, 2015 and was being loaded into containers, it was the printer being loaded into container.



Picture:  Two printers were being loaded into containers and fastened.




Picture:  Two printers is completed for fastening.



Picture: Two fastened printers



Picture: The 3rd printer is well loaded and being fastened



Picture: The ground rails of Model ZYKM IV high speed auto flexo printing (5 color) varnishing drying production line is being loaded and fastened.



Picture: The machine are well loaded and fastened in the first container.



The container’s door is closed and lead sealed.



The other machine units are loaded and being well fastened in the 2nd container.



The other machine units are loaded and being well fastened in the 2nd container.



The other machine units are loaded and being well fastened in the 2nd container.



The other machine units are loaded and being well fastened in the 2nd container.



The other machine units are loaded and being well fastened in the 2nd container.



The other machine units are loaded and being well fastened in the 2nd container.



The other machine units are loaded and being well fastened in the 2nd container.



The loading and fastening of 2nd container are completed, and the door of 2nd container is closed and lead sealed.



The feeder loaded into frame container is being fastened and will be shipped to Romania.



The feeder loaded into frame container is being fastened and will be shipped to Romania


Get Free Inquiry Now
We will contact you as soon as possible!
 
leave a message Get Free Inquiry Now
We will contact you as soon as possible!